Funkwerk R1202 Reference Manual page 192

13 Wireless LAN Controller
178
Field
WPA2 Cipher
Preshared Key
Radius Server
EAP Preauthentifica-
tion
Funkwerk Enterprise Communications GmbH
Description
Possible values:
• (default value): TKIP is used.
• : AES is used.
• : AES or TKIP is used.
Only for Security Mode =
and for WPA Mode =
Select the type of encryption you want to apply to WPA2.
Possible values:
• (default value): AES is used.
• : TKIP is used.
• : AES or TKIP is used.
Only for Security Mode =
Enter the WPA password.
Enter an ASCII string with 8 - 63 characters.
Note: Change the default Preshared Key! If the key has not
been changed, your device will not be protected against unau-
thorised access!
You can control access to a wireless network via a RADIUS
server.
With Add, you can create new entries. Enter the IP address and
the password of the RADIUS server.
Only for Security Mode =
Select whether the EAP preauthentification function is to be ac-
tivated. This function tells your device that WLAN clients, which
are already connected to another access point, can first carry
out 802.1x authentication as soon as they are within range.
Such WLAN clients can then simply connect over the existing
network connection with your device.
The function is activated by selecting
and
and
.
bintec Rxxx2/RTxxx2