Funkwerk R1202 Reference Manual page 184

13 Wireless LAN Controller
170
Field
Operation Band
Bandwidth
Number of Spatial
Streams
Funkwerk Enterprise Communications GmbH
Description
• (default value): The wireless module profile is not active.
• : Your device is used as an access point in
your network.
Select the frequency band of the wireless module profile.
Possible values:
•
ated at 2.4 GHz (mode 802.11b, mode 802.11g and mode
802.11n), inside or outside buildings.
• : Your device is operated at 5 GHz (mode
802.11a/h and mode 802.11n) inside buildings.
• : Your device is operated at 5 GHz (mode
802.11a/h and mode 802.11n) outside buildings.
• : Your device is operated at 5 GHz
(mode 802.11a/h and mode 802.11n) inside or outside build-
ings.
• : Only for so-called Broadband Fixed
Wireless Access (BFWA) applications. The frequencies in the
frequency range from 5755 MHz to 5875 MHz may only be
used in conjunction with commercial offers for public network
accesses and requires registration with the Federal Network
Agency.
Not for Operation Band =
Select how many channels are to be used.
Possible values:
• (default value): One channel with 20 MHz bandwidth
is used.
• : Two channels each with 20 MHz bandwidth are
used. In the case one channel acts as a control channel and
the other as an expansion channel.
Select how many traffic flows are to be used in parallel.
Possible values:
• (default value): Two traffic flows are used.
• : One traffic flow is used.
(default value): Your device is oper-
bintec Rxxx2/RTxxx2