Funkwerk R1202 Reference Manual page 332

Table of Contents

Fields in the Interface Routes menu

IP Address Assign-

IP Assignment Pool

Default Route

Local IP Address

Route Entries

Funkwerk Enterprise Communications GmbH

your partner configures for you are identical.

Select the configuration mode of the interface.

Possible values:

(default value): Enter a static IP address.

way receives an IP address from the server as IPSec client.

way assigns an IP address as DHCP server for connecting cli-

ents. This is taken from the selected IP Assignment Pool.

Only if IP Address Assignment =

Select an IP pool configured in the VPN->IP Poolsmenu. If an

IP pool has not been configured here yet, the message

appears in this field.

Only for IP Address Assignment =

this IPSec peer is to be defined as the default route.

The function is enabled with

The function is disabled by default.

Only for IP Address Assignment =

Enter the WAN IP address of your IPSec tunnel. This can be the

same IP address as the address configured on your router as

the LAN IP address.

Only for IP Address Assignment =

Define routing entries for this connection partner.

: IP address of the destination host or

: Select this option if your gate-

Select whether the route to

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents