Funkwerk R1202 Reference Manual page 161

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Transmit Shaping
Maximum Upstream
Bandwidth
Description
• : The VDSL interface is not active.
• : ETSI T1.413
• :ADSL1 / G.DMT is used.
• : The ADSL mode is automatically adapted
for the remote terminal.
• : ADSL2 / G.992.3 is used.
• : ADSL2 Plus / G.992.5 is used.
• (default value): VDSL is used.
•
Select whether the data rate in the send direction is to be re-
duced. This is only needed in a few cases for special DSLAMs.
Possible values:
•
send direction is not reduced.
• to
ection is reduced to a maximum of 128,000 bps to 2,048,000
bps in defined steps.
• : The data rate is reduced to the value
entered in Maximum Upstream Bandwidth
The default value is Default (Line Speed).
Only for Transmit Shaping =
Enter the maximum data rate in the send direction in bits per
second.
11 Physical Interfaces
: VDSL/ADSL multi mode is used.
(Line Speed) The data rate in the
: The data rate in the send dir-
147