Funkwerk R1202 Reference Manual page 245

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Routing Protocols
Fig. 91:
The menu Networking->RIP->RIP Interfaces->
Fields in the RIP Parameters for menu
Field
Send Version
Receive Version
RIP RIP Interfaces
-> -> ->
consists of the following fields:
Description
Decide whether routes are to be propagated via RIP and if so,
select the RIP version for sending RIP packets over the inter-
face in send direction.
Possible values:
• (default value): RIP is not enabled.
• : Enables sending and receiving of version 1 RIP
packets.
• : Enables sending and receiving of version 2 RIP
packets.
• :Enables sending and receiving RIP packets of
both version 1 and 2.
• : For sending RIP V2 messages over
multicast address 224.0.0.9.
• : RIP V1 messages are sent, received
and processed as per RFC 2091 (triggered RIP).
• : RIP V2 messages are sent, received
and processed as per RFC 2091 (triggered RIP).
Decide whether routes are to be imported via RIP and if so, se-
lect the RIP version for receiving RIP packets over the interface
in receive direction.
Possible values:
15 Routing Protocols
231