18 VPN
336
Field
Alive Check
Propagate PMTU
18.1.4 XAUTH Profiles
In the XAUTH Profiles menu a list of all XAUTH profiles is displayed.
Extended Authentication for IPSec (XAuth) is an additional authentication method for IPSec
tunnel users.
Funkwerk Enterprise Communications GmbH
Description
during compression.
The function is enabled with
The function is disabled by default.
Select whether and how IPSec heartbeats are used.
A bintec IPSec heartbeat is implemented to determine whether
or not a Security Association (SA) is still valid. This function
sends and receives signals every 5 seconds, depending on the
configuration. If these signals are not received after 20 seconds,
the SA is discarded as invalid.
Possible values:
•
: Your device sends and expects no heartbeat. Set
this option if you use devices from other manufacturers.
•
heartbeat from the peer but does not send one itself.
•
: Your device expects no heartbeat from the peer, but
sends one itself.
•
heartbeat from the peer and sends one itself.
•
: Automatic detection of whether the remote ter-
minal is a bintec device. If it is, Heartbeat Both (for a remote
terminal with bintec) or None (for a remote terminal without
bintec) is set.
Select whether the PMTU (Path Maximum Transfer Unit) is to
be propagated during phase 2.
The function is enabled with
The function is enabled by default.
.
: Your device expects a
: Your device expects a
.
bintec Rxxx2/RTxxx2