Funkwerk R1202 Reference Manual page 408

Table of Contents

SIP Endpoint IP Ad-

Outbound Proxy

Funkwerk Enterprise Communications GmbH

Select whether and in which trunk mode the SIP account should

be operated.

Trunk mode (DDI, Direct Dial In) allows an incoming call to be

assigned correctly to a terminal (DDI). For an outgoing call, the

caller can be indicated to the called party.

The setting that you can use depends on the provider.

Possible values:

(default value): Trunk mode is not used. The SIP account

has only one number.

: the media gateway is operated as DDI client. It is as-

signed a DDI.

: The media gateway is operated as a DDI server so

that DDI clients can connect.

: The media gateway is operated as DDI client, but

used as a trunk. This setting is used to connect a software-

based IP PBX from Swyx.

Only for Trunk Mode =

IP address or domain name (FQDN) of the SIP registrar. The

maximum number of characters is 40.

Entries with spaces are not allowed.

Only for Trunk Mode =

Enter the IP address or domain name (FQDN) of the SIP proxy

Only for Trunk Mode =

Enter the name or IP address of the SIP outbound proxy server.

A maximum of 32 characters can be entered.

Here you must make an entry only if, for all SIP sessions, the

communication is not to be direct but via a further proxy.

In SIP client mode: Enter a name or IP address only if this is ex-

plicitly specified by the provider.

Registration and deactivated

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents