Funkwerk R1202 Reference Manual page 186

13 Wireless LAN Controller
172
Field
Max. Transmission
Rate
Burst Mode
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
Channel Plan
Funkwerk Enterprise Communications GmbH
Description
Select the transmission speed.
Possible values:
• (default value): The transmission speed is determined
automatically.
• : According to setting for Operation Band, Band-
width, Number of Spatial Streams and Wireless Mode vari-
ous fixed values in mbps are available.
Activate this function to increase the transmission speed for
802.11g through frame bursting. As a result, several packets
are sent one after the other without a waiting period. This is par-
ticularly effective in 11b/g mixed operation.
The function is enabled with
The function is disabled by default.
If problems occur with older WLAN hardware, this function
should not be active.
Description
Select the desired channel plan.
The channel plan makes a preselection when a channel is se-
lected. This ensures that no channels overlap, i.e. a distance of
four channels is maintained between the channels used. This is
useful if more access points are used with overlapping radio
cells.
Possible values:
• : All channels can be dialled when a channel is selected.
• : Depending on the region, operation band, wireless
mode and bandwidth, the channels that have a distance of 4
channels are provided.
• : You can select the desired channels your-
self.
.
bintec Rxxx2/RTxxx2