Funkwerk R1202 Reference Manual page 463

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Event List
Event List Condition
Reboot device after
MIB/SNMP Variable to
add/edit
Command Mode
Index Variables
Description
Select the event list you want which has been created in Local
Services->Scheduling->Trigger.
For the selected chains of events, select how many of the con-
figured events must occur for the operation to be initiated.
Possible values:
• (default value): The operation is initiated if all events oc-
cur.
• The operation is initiated if a single event occurs.
• : The operation is initiated if none of the events occurs.
• : The operation is initiated if one of the events does
not occur.
Only if Command Type =
Enter the timespan in seconds that must elapse after occur-
rence of the event until the device is restarted.
The default value is seconds.
Only if Command Type =
Select the MIB table in which the MIB variable whose value
shall be changed is saved. First, select the System, then the
MIB Table. Only the MIB tables present in the respective area
are displayed.
Only if Command Type =
Select how the MIB entry is to be manipulated.
Possible settings:
•
shall be modified.
•
Only if Command Type =
Where required, select MIB variables to uniquely identify a spe-
cific data set in MIB Table, e.g.
21 Local Services
(default value): An existing entry
: A new entry shall be created.
. The unique
449