Qos Classification - Funkwerk R1202 Reference Manual

14 Networking
208
Field
DSCP/TOS Filter
(Layer 3)
COS Filter
(802.1p/Layer 2)

14.4.2 QoS Classification

The data traffic is classified in the Networking->QoS->QoS Classification menu, i.e. the
data traffic is associated using class IDs of various classes. To do this, create class plans
for classifying IP packets based on pre-defined IP filters. Each class plan is associated to
at least one interface via its first filter.
14.4.2.1 New
Choose the New button to create additional data classes.
Funkwerk Enterprise Communications GmbH
Description
Specify how the priority of the IP packets is signalled.
Possible values:
• (default value): No priority signalling is used.
• : Differentiated Services Code Point is
used to signal the priority of IP packets (indicated in binary
format, 6 bit).
•
is used to signal the priority of IP packets (indicated in decim-
al format).
• : Type of Service is used to signal the
priority of IP packets (indicated in binary format 8 bit).
• : Type of Service is used to signal the
priority of IP packets (indicated in decimal format).
Additional information on DSCP and TOS in RFC's 3260 and
1349.
Enter the service class of the IP packets (Class of Service,
CoS).
Possible values are whole numbers between
range to .
The default value is .
: Differentiated Services Code Point
and . Value
bintec Rxxx2/RTxxx2