L2Tp - Funkwerk R1202 Reference Manual

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
Send Certificate Re-
quest Payloads
Send Certificate
Chains
Send CRLs
Send Key Hash Pay-
loads

18.2 L2TP

The layer 2 tunnel protocol (L2TP) enables PPP connections to be tunnelled via a UDP
connection.
Your bintec device supports the following two modes:
• L2TP LNS Mode (L2TP Network Server): for incoming connections only
• L2TP LAC Mode (L2TP Access Concentrator): for outgoing connections only
Note the following when configuring the server and client: An L2TP tunnel profile must be
Description
The function is disabled by default.
Select whether certificate requests are to be sent during IKE
(phase 1).
The function is enabled with
The function is enabled by default.
Select whether complete certificate chains are to be sent during
IKE (phase 1).
The function is enabled with
The function is enabled by default.
Deactivate this function if you do not wish to send the peer the
certificates of all levels (from your level to the CA level).
Select whether CRLs are to be sent during IKE (phase 1).
The function is enabled with
The function is disabled by default.
Select whether key hash payloads are to be sent during IKE
(phase 1).
In the default setting, the public key hash of the remote end is
sent together with the other authentication data. Only applies for
RSA encryption; activate this function with
press this behaviour.
.
.
.
to sup-
18 VPN
343