Funkwerk R1202 Reference Manual page 288

Table of Contents

Connection Idle

Fields in the IP Mode and Routes menu

IP Address Mode

Default Route

Create NAT Policy

Funkwerk Enterprise Communications GmbH

Select whether the interface should always be activated.

The function is enabled with

The function is disabled by default.

Only activate this option if you have Internet access with a flat-

rate charge.

Only if Always on is disabled

Enter the idle time in seconds for static short hold. The static

short hold setting determines how many seconds should pass

between sending the last traffic data packet and clearing the

Possible values are

The default value is

for FTP transmission,

for Internet connections.

Choose whether your device has a static IP address or is as-

signed one dynamically.

Possible values:

(default value): Your device is dynamically

assigned an IP address.

: You enter a static IP address.

Select whether the route to this connection partner is to be

defined as the default route.

The function is enabled with

The function is enabled by default.

Specify whether Network Address Translation (NAT) is to be ac-

deactivates the

for LAN-to-LAN transmis-

bintec Rxxx2/RTxxx2

Show Quick Links

Table of Contents