Funkwerk R1202 Reference Manual page 278

17 WAN
264
Field
PPPoE Ethernet Inter-
face
PPPoE Interfaces for
Multilink
User Name
Password
VLAN
VLAN ID
Always on
Funkwerk Enterprise Communications GmbH
Description
up over several interfaces (
, you can connect several DSL connections from a pro-
vider over PPP as a static bundle in order to obtain more band-
width. Each of these DSL connections should use a separate
Ethernet connection for this. At the moment, many providers are
still in the process of preparing the PPPoE Multilink function.
For PPPoE Multilink, we recommend using your device's Ether-
net switch in Split-Port mode and to use a separate Ethernet in-
terface e.g. ,
Only for PPPoE Mode =
Select the Ethernet interface specified for a standard PPPoE
connection.
If you want to use an external DSL modem, select the Ethernet
port to which the modem is connected.
When using the internal DSL modem, select here the EthoA in-
terface configured in Physical
Interfaces->ATM->Profiles->New.
Only for PPPoE Mode =
Select the interfaces you want to use for your Internet connec-
tion. Click the Add button to create new entries.
Enter the user name.
Enter the password.
Certain Internet service providers require a VLAN-ID. Activate
this function to be able to enter a value under VLAN ID.
Only if VLAN is enabled.
Enter the VLAN-ID that you received from your provider.
Select whether the interface should always be activated.
The function is enabled with
The function is disabled by default.
Only activate this option if you have Internet access with a flat-
). If you choose
for each PPPoE connection.
.
bintec Rxxx2/RTxxx2