Funkwerk R1202 Reference Manual page 187

Funkwerk Enterprise Communications GmbH
bintec Rxxx2/RTxxx2
Field
User Defined Channel
Plan
Beacon Period
DTIM Period
RTS Threshold
Short Guard Interval
Short Retry Limit
Description
Only for Channel Plan =
The currently selected channels are displayed here.
With Add you can add channels. If all available channels are
displayed, you cannot add any more entries.
You can also delete entries with the aid of
Enter the time in milliseconds between the sending of two
beacons.
This value is transmitted in Beacon and Probe Response
Frames.
Possible values are to
The default value is .
Enter the interval for the Delivery Traffic Indication Message
(DTIM).
The DTIM field is a data field in transmitted beacons that in-
forms clients about the window to the next broadcast or multic-
ast transmission. If clients operate in power save mode, they
come alive at the right time and receive the data.
Possible values are to
The default value is .
Here you can specify the data packet length threshold in bytes
(1..2346) as of which the RTS/CTS mechanism is to be used.
This makes sense if several clients that are not in each other's
wireless range are run in one access point.
Enable this function to reduce the guard interval (= time
between transmission of two data symbols) from 800 ns to 400
ns.
Enter the maximum number of attempts to send a frame with
length less than or equal to the value defined in RTS
Threshold. After this many failed attempts, the packet is dis-
carded.
13 Wireless LAN Controller
.
.
.
.
173