Groups - Funkwerk R1202 Reference Manual

19 Firewall
376
Firewall Addresses
Fig. 144: ->
The menu Firewall->Addresses->Address List->New consists of the following fields:
Fields in the Basic Parameters menu
Field
Description
Address Type
Address / Subnet
Address Range

19.3.2 Groups

A list of all configured address groups is displayed in the Firewall->Addresses->Groups
menu.
You can group together addresses. This makes it easier to configure firewall rules.
Funkwerk Enterprise Communications GmbH
Address List New
-> ->
Description
Enter the desired description of the address.
Select the type of address you want to specify.
Possible values:
• (default value): Enter an IP address
with subnet mask.
• : Enter an IP address range with a start and
end address.
Only for Address Type =
Enter the IP address of the host or a network address and the
related netmask.
The default value is
Only for Address Type =
Enter the start and end IP address of the range.
.
bintec Rxxx2/RTxxx2