Funkwerk R1202 Reference Manual page 402

20 VoIP
388
Field
Extension / User Name ISDN terminals: Enter the subscriber number the extension.
Interface Type
Select ISDN interface
Select analogue inter-
face
Registration
Funkwerk Enterprise Communications GmbH
Description
SIP terminals: Enter the user name.
A maximum of 40 characters can be entered.
Select the interface type to be used.
The selection depends on the interfaces available.
Possible values:
• : A SIP terminal device is used for the call.
• : An ISDN terminal device is used for the call. Can only
be selected if ISDN interfaces configured with Euro ISDN
point-to-multipoint (NT mode) are available.
• : An analogue terminal device is used for the call.
Can only be selected if analogue interfaces are available.
Only for Interface Type =
Select an ISDN interface. The ISDN interfaces you can select
depends on the device used.
Only for Interface Type =
Select an analogue interface.
Possible values:
• fxs5-1
• fxs5-2
• fxs5-3 (default value)
• fxs5-4
Only for Interface Type =
Specify whether the registration mechanism is to be used by
SIP REGISTER. Normally, every SIP client (user) sends its cur-
rent position to a REGISTRAR server by means of a RE-
GISTER message. This information about the user and his cur-
rent address is held by the REGISTRAR server and queried by
other proxies to find the user.
.
.
.
bintec Rxxx2/RTxxx2