Tunnel Profiles - Funkwerk R1202 Reference Manual

18 VPN
344
created on each of the two sides (LAC and LNS). The corresponding L2TP tunnel profile is
used on the initiator side (LAC) to set up the connection. The L2TP tunnel profile is needed
on the responder side (LNS) to accept the connection.

18.2.1 Tunnel Profiles

A list of all configured tunnel profiles is displayed in the VPN->L2TP->Tunnel Profiles
menu.
18.2.1.1 New
Choose the New button to create additional tunnel profiles.
VPN L2TP Tunnel Profiles
Fig. 132: -> ->
The menu VPN->L2TP->Tunnel Profiles ->New consists of the following fields:
Fields in the Basic Parameters menu
Funkwerk Enterprise Communications GmbH
New
->
bintec Rxxx2/RTxxx2