Funkwerk R1202 Reference Manual page 106

10 System Management
92
System Management
Fig. 33:
The System Management->Interface Mode / Bridge Groups->Interfacesmenu consists
of the following fields:
Fields in the Interfaces menu
Field
Interface Description
Mode / Bridge Group
Configuration Interface Select the interface via which the configuration is to be carried
10.3.1.1 Add
Choose the New button to edit the mode of PPP interfaces.
Funkwerk Enterprise Communications GmbH
Interface Mode / Bridge Groups
->
Description
Displays the name of the interface.
Select whether you want to run the interface in
or whether you want to assign the interface to an existing (
etc.) or new bridge group (
selecting
new bridge group is automatically created.
out.
Possible values:
• (default value): Ex works setting The right con-
figuration interface must be selected from the other options.
• : No interface is defined as configuration interface.
• : Select the interface to be used for con-
figuration. If this interface is in a bridge group, it is assigned
the group's IP address when it is taken out of the group.
Interfaces
->
). When
, after you click the OK button, a
bintec Rxxx2/RTxxx2
,