How To Read This Design Guide; Copyright, Limitation Of Liability And Revision Rights - Danfoss VLT HVAC Basic Drive FC 100 Series Design Manual

How to Read this Design Gui...

1 How to Read this Design Guide

VLT HVAC Basic Drive
FC 100 Series
Software version: 1.4X
This guide can be used with all VLT
HVAC Basic Drive frequency
converters with software version
1.4X.
The actual software version
number can be read from
15-43 Software Version.
VLT HVAC Basic Drive Design Guide
1.1.1 Copyright, Limitation of Liability and
This publication contains information proprietary to
Danfoss. By accepting and using this manual the user
agrees that the information contained herein will be used
solely for operating equipment from Danfoss or equipment
from other vendors provided that such equipment is
intended for communication with Danfoss equipment over
a serial communication link. This publication is protected
under the Copyright laws of Denmark and most other
countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual will function properly in every physical, hardware
or software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior
notice or any obligation to notify former or present users
of such revisions or changes.
1.1.2 Available Literature for VLT HVAC
®
MG.18.C2.02 - VLT is a registered Danfoss trademark
Revision Rights
Basic Drive
- Quick Guide MG.18.AX.YY
- Programming Guide MG.18.BX.YY provides
information on how to programme and includes
complete parameter descriptions.
- Design Guide MG.18.Cx.yy entails all technical
information about the frequency converter and
customer design and applications.
- PC-based Configuration Tool MCT 10, MG.
10.AX.YY enables the user to configure the
1 1
3