How To Read This Design Guide; Approvals & Certificates; Legal Information; Symbols - Danfoss VLT Design Manual

How to Read this Design Gui...

1 How to Read this Design Guide

1.1.1 Software Version and Approvals: VLT
Refrigeration Drive FC 103
®
VLT Refrigeration Drive FC 103
Software version: 1.0x
This manual can be used for all VLT
frequency converters with software version 1.0x.
The software version number can be seen from 15-43 Software
Version.
Table 1.1
1.1.2 Approvals & Certificates
The latest certificates and approvals are available on the
Internet, see
http://www.danfoss.com/BusinessAreas/DrivesSolutions/
Documentations/DDapprovalscertificate.htm

1.1.3 Legal Information

This publication contains information proprietary to
Danfoss. By accepting and using this manual the user
agrees that the information contained herein is used solely
for operating equipment from Danfoss or equipment from
other vendors if such equipment is intended for communi-
cation with Danfoss equipment over a serial
communication link. This publication is protected under
the Copyright laws of Denmark and most other countries.
Danfoss does not warrant that a software program
produced according to the guidelines provided in this
manual will function properly in every physical, hardware
or software environment.
Although Danfoss has tested and reviewed the documen-
tation within this manual, Danfoss makes no warranty or
representation, neither expressed nor implied, with respect
to this documentation, including its quality, performance,
or fitness for a particular purpose.
In no event shall Danfoss be liable for direct, indirect,
special, incidental, or consequential damages arising out of
the use, or the inability to use information contained in
this manual, even if advised of the possibility of such
®
VLT Refrigeration Drive Design Guide
®
®
Refrigeration Drive FC 103
®
MG16G102 - VLT is a registered Danfoss trademark
damages. In particular, Danfoss is not responsible for any
costs, including but not limited to those incurred as a
result of lost profits or revenue, loss or damage of
equipment, loss of computer programs, loss of data, the
costs to substitute these, or any claims by third parties.
Danfoss reserves the right to revise this publication at any
time and to make changes to its contents without prior
notice or any obligation to notify former or present users
of such revisions or changes.
1.1.4 Available literature for VLT
Refrigeration Drive FC 103
®
-
VLT Refrigeration Drive Operating Instructions
1.1-90 kW, MG16E provide the necessary
information for getting the frequency converter
up and running.
®
-
VLT Refrigeration Drive Operating Instructions
110-250 kW, MG16F
®
-
VLT Refrigeration Drive Design Guide, MG16G
entails all technical information about the
frequency converter and customer design and
applications.
®
-
VLT Refrigeration Drive Programming Guide,
MG16H provides information on how to
programme and includes complete parameter
descriptions.
Danfoss technical literature is available in print from local
Danfoss Sales Offices or online at:
http://www.danfoss.com/BusinessAreas/DrivesSolutions/
Documentations/Technical+Documentation.htm

1.1.5 Symbols

The following symbols are used in this manual.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices.
CAUTION
Indicates a situation that may result in equipment or
property-damage-only accidents.
1
®
5
1