Remote Mounting Kit For Lcp - Danfoss VLT AQUA Drive FC 202 Design Manual

System Integration
A
C
D
Figure 3.34 Enclosure Sizes B4, C3, and C4
A Top cover
B Brim
C Base part
D Base cover
E Screw(s)
F Fan cover
G Top clip
Table 3.21 Legend to Figure 3.33 and Figure 3.34
MG20N622
Design Guide
When option module A and/or option module B is/are
used, fit the brim (B) to the top cover (A).
NOTICE!
G
Side-by-side installation is not possible when using the
IP21/IP4X/TYPE 1 Enclosure Kit

3.7.10 Remote Mounting Kit for LCP

The LCP can be moved to the front of an enclosure by
using the remote built-in kit. The fastening screws must be
tightened with a torque of maximum 1 Nm.
The LCP enclosure is rated IP66.
Enclosure
Maximum cable length between LCP and
unit
Communication standard
Table 3.22 Technical Data
Figure 3.35 LCP Kit with Graphical LCP, Fasteners, 3 m (10 ft)
Cable and Gasket
Ordering Number 130B1113
Danfoss A/S © 09/2014 All rights reserved.
3 3
IP66 front
3 m (10 ft)
RS485
77