Kx-Ut Series Sip Phones - Panasonic KX-NS1000 Feature Manual

11.1.1 KX-UT Series SIP Phones

11.1 K
11.1.1 KX-UT Series SIP Phones
Description
KX-UT series telephones are Panasonic SIP phones that provide tighter integration with the PBX than general
SIP phones. The following features are available:
Automatic PBX registration
Like IP-PTs (® 10.1.17 IP-PT (IP Proprietary Telephone)), registration of KX-UT series SIP phones can be
made to occur automatically through system programming.
Phonebook integration
KX-UT series SIP phones will automatically download up to 100 personal speed dialing numbers and up to
300 system speed dialing numbers (® 18.1.9 Speed Dialing, Personal/18.1.10 Speed Dialing, System) and
store this information in its local phonebook. The capacity of the local phonebook depends on the telephone
model. Some models (e.g., KX-UT113) have a maximum capacity of 100 entries. For details about a specific
model, refer to its documentation.
Note
The KX-NS1000 has two kinds of memory for system speed dialing numbers: basic memory and
expansion-for-tenant. A KX-UT series SIP phone downloads the system speed dialing numbers from the
basic memory and stores them in its local phonebook. The numbers stored in expansion-for-tenant will not
be downloaded. For details about basic memory and the expansion-for-tenant, refer to "14.1 PBX
Configuration—[6-1] Feature—System Speed Dial—
System speed dial numbers do not download immediately; they download when the telephone is rebooted.
The number of system speed dialing numbers that are downloaded from the PBX can be changed. Refer
to "9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—
Download For UT Extensions" in the PC Programming Manual.
Customizable flexible buttons
The following features can be assigned through system programming to the flexible buttons available on some
KX-UT series SIP phones:
Button
Single-CO (S-CO)
DN
*1
One-Touch
*1
Headset
*1
Login/Logout
*2
Contact (DSS)
Wrap-up
*2
218 Feature Manual
Used to access a specified CO line for making or receiving calls.
A type of button specific to KX-UT series SIP phones. For details, refer to
the telephone's documentation.
Used to dial a specified number or feature. For details, refer to the
telephone's documentation.
Used to turn on/off the headset mode while idle.
(® 9.1.3 Headset Operation)
Used to switch between log-in and log-out mode. (® 10.1.3 ICD Group
Features—Log-in/Log-out)
Access another extension with one touch. Unlike a One-Touch button, this
type of button cannot be used to dial feature numbers.
Used to switch between the Wrap-up/Not Ready and Ready modes.
(® 10.1.3 ICD Group Features—Log-in/Log-out)
Memory" in the PC Programming Manual.
Usage
System Speed Dial
Document Version 2016-03