Panasonic KX-NS1000 Feature Manual page 95

[Programming Example: DID Table]
Location DID No.
*1
1 123-4567
2 123-2468
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*1
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*2
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*3
® 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
*4
In this example:
If the DID number is "123-4567":
1.
The PBX looks for the DID number in the table and finds it in location 1.
2.
The PBX checks the time mode.
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the DID destination, extension 105, and "Sales" is displayed.
In lunch mode: CLI distribution is disabled. The call is routed to the DID destination, extension 100, and
"Sales" is displayed.
Note
The following settings can also be specified in the DID table:
•
Tenant number: determines the time mode (day/lunch/break/night) for the corresponding CO line.
•
UM service group number: determines the service group to use when a call is handled by the Unified
Messaging system.
•
VM trunk group number: used in Voice Mail DPT (Digital) Integration with a VPS.
Conditions
•
To use this feature, DID must be assigned as the distribution method for the desired CO line port.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—
Timer—DDI / DID
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DDI / DID / TIE
→ Distribution Method
→ DDI/DID/TIE—Remove Digit
→ DDI/DID/TIE—Additional Dial
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Feature Manual References
4.1.14 CLI (Calling Line Identification) Distribution
10.1.11 INCOMING CALL FEATURES
19.1.2 Tenant Service
19.1.3 Time Service
23.1 Capacity of System Resources
20.1.78 Unified Messaging—Service Group
Document Version 2016-03
CLI Distribution
DID
Name
*2 Day Lunch
Enable Disable
Sales
Enable Disable
Judy
*3
Break Night Day
Enable Disable 105
Disable Disable 102
DDI / DID Number
DDI / DID Name
CLI Ring for DDI/DID—Day, Lunch, Break, Night
DDI / DID Destination—Day, Lunch, Break, Night
5.1.7 DID (Direct Inward Dialing)
DID Destination
*4
Lunch Break Night
100 105 100
100 102 100
Incoming Call Inter-digit
Feature Manual 95