Automatic Time Adjustment - Panasonic KX-NS1000 Feature Manual

[Example]
Port 1
Port 2
Port 3
Port 4
PBX 1
Port 1
Port 2
Port 3
Port 4
PBX 2
If PBX 3 has only 4 activation keys, operation can continue if either PBX 1 or PBX 2 goes offline, but if both
PBX 1 and PBX 2 go offline, the number of activation keys will be insufficient.
However, the activation keys for extensions at the Master unit are copied to the Backup Master unit in
Backup Master mode. Therefore, if the extensions specify the Backup Master unit as their secondary PBX,
additional activation keys are not necessary.
•
If an IP-CS channel expansion activation key has been applied to an IP-CS (KX-NS0154 only), a channel
expansion activation key is required at the secondary PBX.
•
KX-UT extensions connected over a remote connection via an SBC are subject to further limitations when
using this feature. For details, see "18.1.1 Simple Remote Connection".
Installation Manual References
8.4.2 One-look Networking Survivability—Automatic Rerouting to Secondary PBX
PC Programming Manual References
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT32—Port Property—Secondary Setting
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property—Secondary Setting
9.19 PBX Configuration—[1-1] Configuration—Slot—V-IPCS4—Port Property—Option—
9.21 PBX Configuration—[1-1] Configuration—Slot—V-UTEXT32—Port Property—Secondary Setting

2.1.8 Automatic Time Adjustment

Description
The PBX clock can be adjusted automatically in the following two ways:
1.
Daylight Saving Time Setting
Document Version 2016-03
With only 4 activation
keys, PBX 3 can accept a
Port 1 maximum of 2 new
connections.
Port 2
Port 3
Port 4
Port 5
Port 6
PBX 3
: Secondary Connection
2.1.8 Automatic Time Adjustment
Announce Mode
Feature Manual 33