Panasonic KX-NS1000 Feature Manual page 374

19.1.3 Time Service
[Programming Example: DID Table]
The DID Table can be programmed to direct calls to a different destination for each time mode based on
the number dialed by the caller. Calls can, for example, be directed to an ICD group during the day mode,
or to the Voice Mail (VM) service of the Unified Messaging system during the lunch and night modes.
Location DID No.
1 123-4567
2 123-2468
Explanation:
A CO line call with the DID number "123-4567" is received at 20:00.
1.
The call will be handled by Time Table 1.
2.
The current time mode is "night" (shown in "Programming Example: Time Table", above).
3.
The call is directed to extension 150, which is a floating extension number used by the Unified
Messaging system (programming not shown here).
[Programming Example: DIL Table]
The DIL Table can be programmed to direct calls to a different destination for each time mode based on
the CO line receiving the call. Calls can, for example, be directed to an ICD group during the day mode,
or to the Voice Mail (VM) service of the Unified Messaging system during the lunch and night modes.
Port No.
(CO Line No.)
01
02
Explanation:
A call is received at 20:00 on CO line 01.
1.
The call will be handled by Time Table 1.
2.
The current time mode is "night" (shown in "Programming Example: Time Table", above).
3.
The call is directed to extension 150, which is a floating extension number used by the Unified
Messaging system (programming not shown here).
4.
Holiday Mode
The PBX can also accommodate 24 different holidays. The start and end date of each holiday can be
programmed, and all holidays are assigned a single time mode. For example, if the "night" mode is assigned
as the time mode for holidays, and a holiday begins December 31st and ends January 1st, all PBX features
will use their "night" settings from 0:00 A.M. on December 31st until 0:00 A.M. on January 1st.
5.
Time Service Button
A flexible button can be customized as one of the following Time Service buttons:
a.
Day/Night button
b.
Day/Night/Lunch button
c.
Day/Night/Break button
d.
Day/Night/Lunch/Break button
These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle
between the day and night modes, for example.
Each Time Service button will display the current time mode using a different light pattern or color, as
shown below.
374 Feature Manual
Tenant
(Time
Day
Table) No.
1 105
2 210
Tenant (Time
Table) No.
Day
1 105
2 210
DID Destination
Lunch Break Night
150 105 150
200 210 200
DIL Destination
Lunch Break Night
150 105 150
200 210 200
Document Version 2016-03