Unified Messaging-Fax Server - Panasonic KX-NS1000 Feature Manual
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Pc programming manual (1294 pages) ,
- Programming manual (1182 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
20.1.38 Unified Messaging—Fax Server
A link to where users can download the fax printer driver is provided in Web Maintenance Console.
→
"Unified Message—Fax Driver Tool" in 8.2.1 Users—Add User—Single User
Conditions
•
For details about the fax driver, refer to the driver's documentation.
Operating Manual References
1.6.6 Other Features—
20.1.38 Unified Messaging—Fax Server
Description
If an optional fax interface card is installed on the mother board, the PBX can receive, distribute, and send
faxes. Received faxes can be saved in mailboxes and then forwarded, printed, downloaded, etc. Also,
subscribers, the Message Manager, and the System Manager can send faxes.
The Unified Messaging system can be configured to receive faxes in the following ways:
Method
Trunk/port service
Caller ID/PIN routing
DIL/DID routing
406
Feature Manual
Sending a Fax from your PC
Setting the incoming call service of a service group to fax service
and then assigning the service group to a port allows faxes to be
received at that port.
The mailbox to which faxes are forwarded must also be specified.
→
22.1 UM Configuration—[3-1] UM Extension / Trunk
Service—Service Group—
Mode - Incoming Call Service
Setting the transfer destination for caller ID routing or PIN routing
to fax service allows faxes to be received from the specified phone
number.
The mailbox to forward faxes to must also be specified.
→
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—
service
→
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—
service
Routing a call to the Unified Messaging system via DIL/DID and
assigning that entry a UM service group (® 20.1.78 Unified
Messaging—Service Group) whose service type is Fax allows
faxes to be received through that line.
→
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL
Table & Port Settings—DIL—
→
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI /
DID Table—
Explanation
Day, Night, Lunch, and Break
Call Transfer for Day, Night, Lunch, and Break
Call Transfer for Day, Night, Lunch, and Break
UM Service Group No.
UM Service Group No.
Document Version 2016-03
Advertisement
Table of Contents
