Panasonic KX-NS1000 Feature Manual page 320

15.1.23 Private Network Features—VoIP (Voice over Internet Protocol)
Routing Table for the Gateway Group for a corresponding entry. If an entry is found, the call is sent to the
connected PBX.
Automatic Rerouting of VoIP Calls to Public CO Lines
When a VoIP call cannot be completed successfully, the PBX can automatically attempt to make the call using
a public CO line instead. This provides a backup method of making calls in cases when IP network transmission
cannot be completed successfully.
[Example]
Telephone Company
(area code: 222)
PBX-1
V-IPGW
Extn .1000
Dials
PBX code: 30
"7-20-1011".
The leading numbers of extensions accessed through the VoIP network are added as entries to the Quick
Dialing table, in addition to being registered as Other PBX Extension Numbers, as shown below:
[Programming Example]
Number to dial to call an extension at another PBX using VoIP network:
7 (TIE line access number) + 20 (PBX Code) + 1011 (extension number)
Number to dial to call that extension using a public CO line:
9 (CO line access number) + 1-333-123-1011
[Quick Dialing Table]
Quick Dialing No.
720
If the call cannot be completed using the VoIP network, and the dialed leading number is found in the Quick
Dialing Table, the call will be automatically rerouted to a CO line and as specified by the corresponding
destination number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public CO line as specified.
320 Feature Manual
1-333-123-1011
Private IP
Network
Destination No.
91333123
Telephone Company
(area code: 333)
PBX-2
V-IPGW
Extn .1011
(333-123-1011)
PBX code: 20
Document Version 2016-03