18.1.11 Stacking Connection
A PBX connected through a stacking connection is referred to as a "legacy gateway".
PBX
PBX
Legacy Gateway
KX-NS1000
PBX
Legacy Gateway
KX-UT
IP-PT
IP-PT
Site 1
All programming can be done through Web Maintenance Console on the KX-NS1000.
Conditions
•
Hardware Requirement: STACK-M card (KX-NS1000) and a STACK-S card (for each legacy gateway).
•
The KX-TDA15 and KX-TDA30 are not supported for stacking.
•
The following features are available through a legacy gateway:
–
Paralleled Telephone
–
T1 Line Service
–
Voice Mail (VM) Group
–
Voice Mail DTMF Integration
–
Voice Mail DPT Integration
–
Centralized Voice Mail using a VPS
For details about these features and how to configure the necessary settings, refer to the documentation
of the PBX you will be connecting.
•
IP extensions and CO lines, including SIP CO lines, are not supported through legacy gateways.
Installation Manual References
4.6 Stacking Cards
Section 6 Information about Stacking PBXs
362
Feature Manual
Private IP Network
(One-look)
Site 3
PBX
STACK-M
Legacy Gateway
KX-NS1000
Legacy Gateway
PBX
Legacy Gateway
KX-NS1000
Site 2
PBX
APT
STACK-S
T1 line
PBX
STACK-S
DPT
DSS Console
PBX
PSTN
Document Version 2016-03