10.1.18 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
Service
Caller ID
3.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Conditions
•
En bloc
The PBX sends all of dialed digits at once after the extension user completes dialing. The PBX recognizes
the end of dialing as follows:
–
the # key is pressed (programmable).
10.9 PBX Configuration—[2-9] System—System Options—Option 2—
End of Dial for en Bloc mode
–
the dialed number is a preprogrammed telephone number.
11.1.4 PBX Configuration—[3-1-4] Group—Trunk Group—Dialing Plan
–
the inter-digit timer expires.
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Dial—Extension Inter-digit
•
Extension Number
An extension number can be assigned to each ISDN port.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
Number
•
Network Type
Each ISDN port can be set to the requirements of each country/area.
•
L1 Active Mode and L2 Data Link Mode
The active mode of Layer 1 (L1) and the data link mode of Layer 2 (L2) can be selected individually
(Permanent or Call by Call) for each ISDN port.
•
TEI Assignment Mode
The Terminal Endpoint Identifier (TEI) assignment mode can be selected for each ISDN port.
•
Bearer Mode
The bearer mode can be assigned for each ISDN port.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 7—
Bearer
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 7—
Bearer
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Card Property - PRI type
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 2—
Dial for en Bloc mode
11.1.4.1 PBX Configuration—[3-1-4] Group—Dialing Plan—Auto Assign
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
214
Feature Manual
Description
The PBX receives Caller ID information, such as
the caller's name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
Details in
® 4.1.3 Caller ID
ISDN en Bloc Dial—[#] as
Dial—Extension
ISDN en Bloc Dial—[#] as End of
Document Version 2016-03
Extension
ISDN
ISDN