Unified Messaging-List All Names; Unified Messaging-Live Call Screening (Lcs) - Panasonic KX-NS1000 Feature Manual

20.1.51 Unified Messaging—Live Call Screening (LCS)
20.1.50 Unified Messaging—List All Names
Description
Allows callers to listen to a list of all subscribers' names and extension numbers in Automated Attendant service
or Custom Service.
Conditions
•
This feature is only available when:
a.
The subscriber's name has been recorded.
b.
The subscriber's extension number is set.
c.
The "Directory Listing" parameter for the subscriber's Class of Service is set to "Yes".
•
To return to the previous menu in Automated Attendant service or Custom Service, press
Feature Manual References
20.1.6 Unified Messaging—Automated Attendant (AA)
20.1.27 Unified Messaging—Custom Service
20.1.51 Unified Messaging—Live Call Screening (LCS)
Description
Allows the subscriber to monitor incoming calls as messages are being recorded. The subscriber has the option
of answering calls while monitoring or allowing the message to be recorded without interruption. There are 2
modes in this feature: Hands-free and Private. Hands-free mode allows the subscriber to hear the caller through
the telephone's speaker and answer the call by lifting the handset. Private mode alerts with a tone and requires
the telephone handset to be lifted before the message can be monitored. The subscriber can talk to the caller
by pressing the LCS button on his or her proprietary telephone (if programmed).
Conditions
•
This feature is not available for SIP extensions. For more information about telephone types that support
this feature, refer to the Operating Manual.
•
LCS Button
A flexible button can be customized as the LCS button.
•
Extension Personal Identification Number (PIN)
To prevent unauthorized monitoring, it is recommended the LCS user assign an extension PIN. This PIN
will be required when setting LCS (® 6.1.10 Extension PIN (Personal Identification Number)). If the user
forgets the PIN, it can be cleared by an extension assigned as the manager.
•
Each extension can be programmed to either end recording or continue recording the conversation after
the call is intercepted, through personal programming (LCS Mode Set [After Answering]).
•
To use the LCS feature on a PS in Wireless XDP Parallel Mode, LCS can only be turned on or off from the
wired telephone. In Wireless XDP Parallel Mode, setting LCS on/off from the PS has no effect.
(® 22.1.6 Wireless XDP Parallel Mode)
•
A sub extension of a one-numbered extension cannot perform LCS. (® 14.1.7 One-numbered
Extension).
414 Feature Manual
.
Document Version 2016-03