Panasonic KX-NS1000 Feature Manual page 147

Data Line Security set/cancel
Call Waiting Mode: Call from Extension off/BSS/OHCA/Whisper OHCA
Call Waiting Mode: Call from CO set/cancel
Executive Busy Override Deny set/cancel
Not Ready Mode on/off
Log-in/Log-out
*1
Incoming Call Queue Monitor
Hot Line program/set/cancel
Absent Message set/cancel
BGM set/cancel
Remote Wake-up Call
Timed Reminder set/cancel
Printing Message
Extension Dial Lock set/cancel
Time Service Switch
Remote Extension Dial Lock off
Remote Extension Dial Lock on
NDSS Monitor Release (Centralized BLF Monitor Cancel)
Extension Feature Clear
Extension Personal Identification Number (PIN) set/cancel
Dial Information (CTI)
Other PBX Extension Number (TIE) 01–16
Quick Dialing 1–80
*1 SIP extension users can use these feature numbers.
*2
From a SIP extension, this feature number can be used only for Call Park Retrieve.
*3
This feature number is used for the SIP-carrier transfer feature. For more information, see 18.1.4 SIP Refer Transfer.
*4 It is possible to register Quick Dialing numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public CO Line feature.
2.
Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized for
easy use. The numbers should be one digit (0-9, " ", or "#") and must not conflict. For a list of the default
settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Call Waiting/DND Override
Executive Busy Override
Document Version 2016-03
Feature
*1
*1
*1
*1
*1
*1
*1
*1
*1
*1
*4
Feature
*1
*1
7.1.4 Flexible Numbering/Fixed Numbering
*1
*1
Default
1 or 2
3
Default
730
731
732
733
735
736
739
740
750
751
76
760
761
77
780
782
783
784
790
799
None
None
None
*2
Feature Manual 147