Panasonic KX-NS1000 Feature Manual page 88
Pure ip-pbx
Hide thumbs
Also See for KX-NS1000:
- Pc programming manual (1294 pages) ,
- Programming manual (1182 pages) ,
- Manual (542 pages)
Table of Contents
Advertisement
4.1.24 CTI (Computer Telephony Integration)
[Example]
PBX
Mother
Board
PC
Conditions
•
CTI application software must be installed on the connected PC. In addition, KX-NSF101 (Activation Key
for CTI interface) is required to use CTI applications other than CA. In a One-look network, the activation
key is required only for the Master unit.
•
CTI support for SIP extensions is available only for KX-UT series SIP phones.
•
Application Programming Interface (API)/Protocol
Type
Third Party Call Control
•
Only one CTI server can connect to the PBX at a time.
•
For details about specific CTI features, refer to the manual for your CTI application software.
•
When using a Panasonic TSP, refer to "Before Installing" in the KX-series TSP Installation Manual.
Installation Manual References
4.10 Connection of Peripherals
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
10.9 PBX Configuration—[2-9] System—System Options—Option 6 (CTI)
88
Feature Manual
CTI Server
LAN
PC
LAN
•
ECMA CSTA Phase 3
•
TAPI 2.1
API/Protocol
Dial Information (CTI)
Document Version 2016-03
Advertisement
Table of Contents
