Ring Tone Pattern Selection - Panasonic KX-NS1000 Feature Manual

[Personal/System Speed Dialing Name Display]
•
When a CO line call is made from the Outgoing Call Log, if a name is registered to the Personal/System
Speed Dialing entry, the name is displayed on the second line of a display PT's LCD. The name is not
displayed on a phone with a one line LCD.
•
If a name is registered to the Personal/System Speed Dialing entry, when another call is made using the
REDIAL button after a CO line call is made using Personal/System Speed Dialing, the name is displayed
on the second line of a display PT's LCD.
•
When a CO line call is made from the Outgoing Call Log, if a name is not registered to the Personal/System
Speed Dialing entry, the dialed number is displayed on a display PT's LCD.
•
If the number registered in the Personal/System Speed Dialing is changed after the number is recorded in
the Outgoing Call Log, the Personal/System Speed Dialing entry name will not be displayed. Instead, the
name registered in the Outgoing Call Log will be displayed.
•
If the name registered in the Personal/System Speed Dialing is changed after the name is recorded in the
Outgoing Call Log, the changed name will be displayed on a display PT's LCD.
•
If the mode to save digits dialed after connection is enabled, all digits (including the automatically entered
"P" for pause) dialed up until the end of the call must be registered in the Personal/System Speed Dialing
entry to enable this feature.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone
→ Automatic Redial—Repeat Counter
→ Automatic Redial—Redial Call Ring Duration
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
10.9 PBX Configuration—[2-9] System—System Options—Option 2
→ Redial—Automatic Redial when No Answer (ISDN)
→ Redial—Save Dial After Connection to Redial Memory
→ Redial—Call Log by Redial key
10.9 PBX Configuration—[2-9] System—System Options—Option 7—
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 7—
Call Log Memory
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 7—
Call Log Memory
Feature Manual References
23.1 Capacity of System Resources
Operating Manual References
1.3.60 Redial, Last Number
1.4.1 Call Log, Incoming

17.1.2 Ring Tone Pattern Selection

Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
Document Version 2016-03
17.1.2 Ring Tone Pattern Selection
Redial
Outgoing Call Log—Extension Call
Feature Manual
Outgoing
Outgoing
335