Panasonic KX-NS1000 Feature Manual page 70

4.1.11 CALL WAITING FEATURES
Setting Data Line Security cancels the Call Waiting setting. (® 5.1.1 Data Line Security)
•
Caller Information
With the Call Waiting tone, the caller's information flashes on the display for five seconds, followed by a
10-second pause, then flashes again for five seconds.
•
Call Waiting from the Telephone Company
Besides the Call Waiting service within the PBX, the Call Waiting tone offered by an analog line from the
telephone company informs the extension user of another incoming CO line call that is waiting. He can
answer the second call by disconnecting the current call or placing it on hold using EFA (® 6.1.1 EFA
(External Feature Access)). For details, consult your telephone company.
Call Waiting Caller ID (Visual Caller ID):
When using the call waiting tone supplied by the telephone company over analog lines, the caller's
telephone number and name can be received. Either the name or the number will flash on the display for
five seconds, followed by a 10-second pause, then flash again for five seconds.
Note that the received caller information may not be displayed on telephones or wireless phones connected
to SLT ports.
•
OHCA and Whisper OHCA are enabled or disabled by the Class of Service (COS) of the calling extension.
•
OHCA and Whisper OHCA do not compatible with some telephone types. In such cases, a Call Waiting
tone will be sent to the called extension.
OHCA Mode of
Calling
Extension's
COS
Disable
Enable
•
The notification receiving methods (call waiting tone, OHCA, and Whisper OHCA) are available when the
called extension is having a conversation with another party. If the extension is not having a conversation
but is unavailable to receive the notification (dialing a number, for example), the calling extension will be
kept waiting until the called extension becomes available. Even while waiting, the calling extension will
hear a ringback tone.
•
If none of these methods of receiving notification (call waiting tone, OHCA, or Whisper OHCA) are set at
the called party, the caller will hear a reorder tone after trying to send a call waiting notification.
PC Programming Manual References
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type—
Signaling
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→ Call Waiting Mode: Call from Extension
→ Call Waiting Mode: Call from CO
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
→ BSS / OHCA / Whisper OHCA / DND Override
→ BSS / OHCA / Whisper OHCA / DND Override-2
10.9 PBX Configuration—[2-9] System—System Options—Option 5—
for Extension Call
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Option 2— Manual C. Waiting for Extension Call
→Option 2— Automatic C. Waiting
→Option 4— Call Waiting Tone Type
70 Feature Manual
Called Extension's Call Waiting Mode
OFF
Call Waiting Tone
Call Waiting Call Waiting tone
disabled
Call Waiting Call Waiting tone
disabled
ON
OHCA Whisper OHCA
Call Waiting tone Call Waiting tone
OHCA (or Call Whisper OHCA (or
Waiting tone) Call Waiting tone)
Caller ID—Caller ID
Call Waiting—Automatic Call Waiting
Document Version 2016-03