Number in
the Pattern
(9)
(10)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Item
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Document Version 2016-03
Data
CD (Condition
Shows other call information using the following codes:
Code)
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost
Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Controls whether outgoing CO line calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether incoming CO line calls are shown.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether outgoing intercom calls are recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Call
Controls whether the Log-in/Log-out status of extensions is
recorded.
® 19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR—
Log-out
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code) can
be shown (as supplementary information) only when the modified
number is selected in this setting. (® 2.1.3 ARS (Automatic
Route Selection))
® 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
Options—
18.1.6 SMDR (Station Message Detail Recording)
Description
Description
Print Information—Outgoing
Print Information—Incoming
Print Information—Intercom
Print Information—Log-in /
Option—ARS Dial
Feature Manual
353