Stacking Connection - Panasonic KX-NS1000 Feature Manual

[Name Display on CO Line Calls]
•
When a CO line call is made using System Speed Dialing, if a name is registered to the System Speed
Dialing entry, the name is displayed on the second line of a display PT's LCD. The name is not displayed
on a phone with a one line LCD.
•
After a CO line call is made using System Speed Dialing, if Connected Name Identification Presentation
(CONP) information is returned, the name registered in the CONP information takes precedence over the
System Speed Dialing name and is displayed on a display PT's LCD. (® 15.1.20 Private Network
Features—QSIG—CLIP/COLP (Calling/Connected Line Identification Presentation) and CNIP/CONP
(Calling/Connected Name Identification Presentation))
•
If a recall feature or a transfer feature is used, the name registered to the System Speed Dialing entry will
no longer be displayed on a display PT's LCD.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Personal Speed Dialing
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—
Speed Dialing
12.1.3 PBX Configuration—[4-1-3] Extension—Wired Extension—Speed Dial
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.6 PBX Configuration—[6-6] Feature—Tenant—
14.6 PBX Configuration—[6-6] Feature—Tenant—
Feature Manual References
23.1 Capacity of System Resources
Operating Manual References
1.3.64 Speed Dialing, System
1.4.1 Call Log, Incoming
1.4.3 Directories
3.1.2 Personal Programming

18.1.11 Stacking Connection

Description
KX-TDA/KX-TDE/KX-NCP series PBXs can be connected to a KX-NS1000 PBX via a stacking connection and
used to connect telephones, devices, and CO lines that are not natively compatible with the KX-NS1000. Such
items include DPTs and APTs, DSS Consoles, digital CSs (i.e., non-IP), and T1 lines.
Document Version 2016-03
System Speed Dial
Extension Directory
18.1.11 Stacking Connection
System Speed Dialing /
TRS Level for System
Feature Manual 361