Time Service - Panasonic KX-NS1000 Feature Manual

Tenant No.
3
4
5
•
The following features used by incoming call distribution (ICD) group are determined by the tenant number
assigned to them (® 10.1.1 ICD GROUP FEATURES):
–
The Music on Hold heard by a caller while waiting in a queue.
–
The Time Table used by the ICD group to determine the current time mode. An overflow destination
and Queuing Time Table can be assigned for each time mode.
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
10.4 PBX Configuration—[2-4] System—Week Table
10.5 PBX Configuration—[2-5] System—Holiday Table
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
11.2 PBX Configuration—[3-2] Group—User Group
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main—
Tenant Number
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main—
13.1 PBX Configuration—[5-1] Optional Device—Doorphone—
13.5 PBX Configuration—[5-5] Optional Device—External Sensor—
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.6 PBX Configuration—[6-6] Feature—Tenant
Section 16 PBX Configuration—[8] ARS
16.5 PBX Configuration—[8-5] ARS—Carrier—Authorization Code for Tenant
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—
Feature Manual References
23.1 Capacity of System Resources

19.1.3 Time Service

Description
Time modes are used by many PBX features to determine how they will function during different times of day.
For example, incoming calls can be directed to sales staff during the day and to the Unified Messaging system
at night, extension users can be prohibited from making long distance calls during lunch time, etc.
There are four time modes—day, lunch, break, and night. The start and end times of each time mode are
programmed for each day of the week in a Time Table. Each Time Table has a number which corresponds to
the tenant it serves, i.e., Tenant 1 uses Time Table 1, etc.
1.
Time Service Switching Mode
Document Version 2016-03
ARS Mode
Same as System Setting (System Setting:
On)
On for Local Access Operation
Off
19.1.3 Time Service
Applied ARS Entries
Entries 1 to 1000
Entries 151 to 200
Not applied
Tenant Number
Tenant No.
Tenant Number
Feature Manual
User Group
User Group
Tenant Number
371