Panasonic KX-NS1000 Feature Manual page 200

10.1.11 INCOMING CALL FEATURES
2.
Distribution Method
Each public CO line port (channel) can use a different method of directing calls to their destinations as they
are received.
Distribution Method
Direct In Line (DIL)
Direct Inward Dialing
(DID)
Calling Line Identification (CLI) distribution is the most customizable call distribution method available. It
allows calls from specific people to be directed to specific destinations, based on the callers' telephone
numbers. CLI distribution, when enabled for the current time mode, takes precedence over DIL or DID
distribution.
Distribution Method
Calling Line
Identification (CLI)
Distribution
3.
Available Distribution Method for Public CO Lines
Card
Type
Mother Board
(V-IPGW)
Mother Board
(V-SIPGW)
ELCOT/LCOT
T1
PRI
: Default
: Available
4.
Available Destination
The following destination types can be programmed as DIL, DID, or CLI destinations.
Wired Extension (PT/SLT/SIP Extension/T1-OPX)
PS
ICD Group
PS Ring Group
200 Feature Manual
Directs a call to a preprogrammed destination,
such as an operator, based on the CO line
carrying the call.
Directs a call received on a DID line to a
preprogrammed destination based on the
telephone number dialed by the caller.
Directs a call to its preprogrammed destination if
the caller's telephone number and its CLI
destination has been stored in the System Speed
Dialing Table.
Distribution Method
Port/Channel
Type
DIL
LCOT
GCOT
DID
TIE (E&M)
CO
Destination Type
Description
Description
DID
Details in
® 5.1.8 DIL (Direct
In Line)
® 5.1.7 DID (Direct
Inward Dialing)
Details in
® 4.1.14 CLI
(Calling Line
Identification)
Distribution
Availability
ü
ü
ü
ü
Document Version 2016-03