Panasonic KX-NS1000 Feature Manual page 25

Routing Plan Priority: For each Routing Plan, a different carrier can be assigned a different priority for
each time of day. Generally, the carrier assigned to priority 1 will be used, however, if the CO lines assigned
to this carrier are busy, a different available carrier will be used according to priority level.
ARS Leading Number Table
Location Leading
No.
1
2 01181
3 01144
ARS Routing Plan No. 1
Monday Time Block A
Time Block B
Time Block C
Time Block D
® 16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time Setting
*1
® 16.4 PBX Configuration—[8-4] ARS—Routing Plan Priority
*2
5.
Carrier Table
Each carrier must be programmed in the Carrier Table. Here each carrier is assigned a carrier number,
name, the CO lines it is used with, etc.
® 16.5 PBX Configuration—[8-5] ARS—Carrier—Carrier
Carrier Name: Assign a name for the carrier. Used only as a reference.
Trunk Group: Assign the trunk groups which can be used when making calls via this carrier.
When using Web Maintenance Console, trunk groups can be assigned to a carrier using an on/off setting
for each trunk group. They can also be given a priority setting (1–4) which decides the order they are
searched when seizing a line. If there are no available lines in the trunk groups set to priority 1–4, the other
trunk groups set to on are searched in the order of smallest number first.
[Example]
Carrier
ABC
XYZ 12
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG Priority
® 16.5 PBX Configuration—[8-5] ARS—Carrier—TRG 01–TRG 96
Carrier Access Code: Enter the carrier's access code. Consult carrier for details.
Removed Number of Digits: There may be circumstances where the user-dialed number must be
modified in order for the carrier to connect the call. In this case, enter here the number of digits to be
removed automatically from the beginning of the dialed number.
Modify Command: When a call is made using this carrier, the telephone number must be modified to meet
the criteria required by the carrier in order to connect the call. Program here the commands needed to
modify the user-dialed number as necessary.
CLIP Table No.: Assign the CLIP number for the carrier. CLIP numbers are assigned according to the
CLIP Table No. assigned for the carrier.
Document Version 2016-03
Additional No.
No. of Digits
1212 7
0
0
Time Table
*1
9:00
12:00
17:00
23:00
Priority Setting
1 2 3
9 3 1
4 None
2.1.3 ARS (Automatic Route Selection)
Routing Plan
No.
1
5
12
Carrier
Priority 1 Priority 2
Carrier A Carrier M
Carrier A Carrier M
Carrier C Carrier M
Carrier J Carrier M
Trunk Groups
Set to On
4
7 5, 7, 9, 11
None 6, 10
*2
Searching Order
9 ® 3 ® 1 ® 7 ® 5 ® 11
12 ® 4 ® 6 ® 10
Feature Manual 25