Music On Hold - Panasonic KX-NS1000 Feature Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

13.1.4 Music on Hold

If Distinctive Dial mode is enabled, dial tone 4 will be sent to an extension when a message has been left
on the extension. (® 5.1.5 Dial Tone)
It is possible to leave a Message Waiting notification while hearing a ringback tone, busy tone, or DND
tone.
Messages are always left on the original destination extension, regardless of that extension's FWD settings.
(® 7.1.6 FWD (Call Forwarding))
Both the calling extension and the called extension can cancel a notification after it has been left.
If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left in a
mailbox, whether the notification is cleared or not depends on the Unified Messaging settings or the
VPS's settings.
SLT with a Message Waiting Lamp (available only with KX-TDE/KX-TDA-series PBXs connected
over a stacking connection)
The lamp activates in the same way as the MESSAGE button on a PT, if an EMSLC, MSLC or MCSLC
card is connected to the PBX. The Message Waiting Lamp light pattern can be selected from one of 12
patterns. For details, refer to the documentation of the PBX to which the extensions are connected.
Only Standard type or Unsolicited type general SIP extensions can control message waiting indication
LEDs. For details, see 9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port
Property—
MWI Method.
PC Programming Manual References
9.17 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT32—Port Property
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—
Cancel / Call Back
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature—
Set
10.9 PBX Configuration—[2-9] System—System Options—Option 3—
10.9 PBX Configuration—[2-9] System—System Options—Option 5—
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—
Feature Manual References
7.1.3 Flexible Buttons
23.1 Capacity of System Resources
Operating Manual References
1.3.43 Message Waiting
13.1.4 Music on Hold
Description
Music or other audio can be played to a party that has been put on hold. The following audio sources are
available:
a.
User-supplied audio file
b.
External music source
c.
Tone
234
Feature Manual
Message Waiting Set /
Message Waiting
Dial Tone—Distinctive Dial Tone
SLT—Message Waiting Lamp Pattern
Type
Type
Document Version 2016-03

Advertisement

Table of Contents
loading

Table of Contents