Kx-Ut Series Sip Phones - Panasonic KX-NS500 Features Manual

5.2.2 SIP (Session Initiation Protocol) Extension

5.2.2.1 KX-UT Series SIP Phones

Description
KX-UT series telephones are Panasonic SIP phones that provide tighter integration with the PBX than general
SIP phones. The following features are available:
Automatic PBX registration
Like IP-PTs (® 5.2.1 IP Proprietary Telephone (IP-PT)), registration of KX-UT series SIP phones can be made
to occur automatically through system programming.
Phonebook integration
A KX-UT series SIP phone will automatically download up to 100 personal speed dialling numbers and up to
300 system speed dialling numbers (® 2.6.4 Speed Dialling—Personal/System) and store this information in
its local phonebook.
Note
The PBX has two kinds of memory for system speed dialling numbers: basic memory and
expansion-for-tenant. A KX-UT series SIP phone downloads the system speed dialling numbers from the
basic memory and stores them in its local phonebook. The numbers stored in expansion-for-tenant will not
be downloaded. For details about basic memory and the expansion-for-tenant, refer to "14.1 PBX
Configuration—[6-1] Feature—System Speed Dial—
System speed dial numbers do not download immediately; they download when the telephone is rebooted.
The number of system speed dialling numbers that are downloaded from the PBX can be changed. Refer
to "9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—Main—
Speed Dial Download For UT Extensions" in the PC Programming Manual.
Customisable flexible buttons
The following features can be assigned through system programming to the flexible buttons available on some
KX-UT series SIP phones:
Button
Single-CO (S-CO)
DN
*1
One-Touch
*1
Headset
*1
Login/Logout
*2
Contact (DSS)
Wrap-up
*2
488 Feature Guide
Used to access a specified trunk for making or receiving calls.
A type of button specific to KX-UT series SIP phones. For details, refer to
the telephone's documentation.
Used to dial a specified number or feature. For details, refer to the
telephone's documentation.
Used to turn on/off the headset mode while idle.
(® 2.11.4 Headset Operation)
Used to switch between log-in and log-out mode. (® 2.2.2.8 Log-in/
Log-out)
Access another extension with one touch. Unlike a One-Touch button, this
type of button cannot be used to dial feature numbers.
Used to switch between the Wrap-up/Not Ready and Ready modes.
(® 2.2.2.8 Log-in/Log-out)
Select Table" in the PC Programming Manual.
Usage
System