Table of Contents
Advertisement
5. MONITOR FUNCTIONS AND THEIR USE
MELSEC-A
(4)
Registration to change the key code of an operation panel (operation
panel key code registration)
When (a) the device write function of a monitor function is used, and (b)
the following two conditions have been met, use the Set key (Set
operation panel key code) window shown below to register the key code
to be changed (see Section 5.12).
(Conditions)
• The operation panel is used as the data input device during monitor-
ing.
The key code of an operation panel set beforehand has to be
changed.
The figure below shows the Set key (Set operation panel key code)
window when the operation panel key code has not been changed.
The key code of each operation panel key is displayed.
•
94 95 96 97
80 82 89 88
81 83 8A 8C
The key code of each
41
42 43 44 45 46 47 FF 37 38 39 88
operation panel key is -
48 49 4A 48 4C 40 4E FF 34 35 36 98
displayed.
4F 50 51 52 53 54 55 FF 31 32 33 2E
56 57 58 59 SA
20 20 FF 30 30 30 00
I
Set switch
I
Panel
(Input
I
ASC
I
~)
Delete
End
I
Slop
(5)
Registration of the auxiliary functions which are used in the monitor
mode (auxiliary functions registration)
•
The auxiliary functions
menu is displayed.
-
Register the monitoring conditions for using the following monitor func-
tions during monitoring:
Edit report function (See Sections 5.9 and 10.5) .
Announce function (See Sections 5.4.5, 5.10, and 10.4).
Time action function (See Section 5.11).
Snapshot function (See Sections 5.12 and 10.7).
The menu box shown below is displayed when seiecting auxiliary func-
tions to be registered.
Screen chang
Aux func.
Edit
report file
Announcement list
Time action list
Set key (set special key)
Set key (set operation panel key code)
Set snap shot
5-5
Advertisement
Table of Contents
