Scanner Wire; Adf Image Adjustment; Registration - Ricoh D197 Service Manual

4.20.3 SCANNER WIRE

See the Adjusting the Scanner Wire. (page 4-46)

4.20.4 ADF IMAGE ADJUSTMENT

Registration

A: Leading Edge Registration
B: Side-to-side Registration

Make a temporary test chart as shown above using A3/DLT paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed
stations.
2. Check the registration, and adjust using the following SP modes if necessary.
SP No.
ADF Adjustment Side-to-Side Regist:
SP6-006-001
Front
ADF Adjustment Side-to-Side Regist:
SP6-006-002
Rear
ADF Adjustment Leading Edge
SP6-006-003
Registration: Front
ADF Adjustment Leading Edge
SP6-006-004
Registration: Rear
ADF Adjustment Buckle: Duplex
SP6-006-005
Front
SP6-006-006 ADF Adjustment Buckle: Duplex Rear ±5.0 mm
SM
SP Name
4-197
Adjustment after Replacement
Adjustment Range
±3.0 mm
±3.0 mm
±5.0 mm
±5.0 mm
±5.0 mm
D197/D198/D199/D200/D201/D202