Ricoh D197 Service Manual page 675

SP Mode Tables - SP5000-1
TRAY 5: 5
5-181-023
Sets tray 5 detection size (12.6x17.7 or 12x18) when "Auto Detect" is
seletected in the [Tray Paper Settings].
LCT
5-181-024
Sets LCT detection size when "Auto Detect" is seletected in the [Tray
Paper Settings].
[RK4]
Enables or disables the prevention for RK4 (accounting device)
5186
disconnection. If the RK4 is disconnected for 10 seconds when this SP is
set to "1 (Enable)", the machine automatically jams a sheet of paper and
stops.
5-186-001 -
[Copy Nv Version]
5188
Displays the version number of the NVRAM on the controller board.
5-188-001 -
[Mode Set]
5191
Shifts to the power save mode or not.
5-191-001 Power Str Set
D197/D198/D199/D200/D201/D202
[0 to 1 / 1 (NA), 0 (EU, AA, CHN, TWN,
KOR) / 1/step]
*ENG
0: 12.6X17.7
1: 12X18
[0 to 2 / 1 (NA), 0 (EU, AA, CHN, TWN,
KOR) / 1/step]
*ENG 0: A4 LEF
1: LT LEF
2: B5 LEF
*ENG [0 or 1 / 0 / 1/step]
*CTL [- / - / -]
[0 or 1 / 1 / 1/step]
*CTL 0: OFF
1: ON
5-100 SM