Ricoh D197 Service Manual page 870


Reading user stamp data is not counted.

If a job is cancelled, the pages output as far as the cancellation are counted.

If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.

If pages are copied but not stored on the document server, these counters do not change.

If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6
and the L: count is 6.

If you enter document server mode then scan 6 pages, the L: count is 6.
[ADF Org Feeds]
8221
These SPs count the number of pages fed through the ADF for front and back
side scanning.
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
001
the same as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
002
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is
the same as the number of pages fed for duplex rear-side scanning.

When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.

If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
SM
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
5-295 D197/D198/D199/D200/D201/D202
SP Mode Tables - SP8000-1