SPDF DF3080
2.10.2 INSTALLATION PROCEDURE
When you install this option, turn off the power supply to the machine, and unplug the
power plug from the wall socket.
If this option is installed when the power is ON, it will result in an electric shock or a
malfunction.
Do not turn the power on until you perform "adjustment after installation". Otherwise, it
may not start normally.
Attaching the SPDF
1.
Place the unit on the machine temporarily, and remove the orange tapes and shipping
retainers.
2.
Remove the items in the package (boards, fixing screws, etc.).
3.
Attach the two stepped screws to the machine.
The larger-stepped screw [A] is for the right side and the smaller-stepped screw [B] is
for the left side of the main machine.
D197/D198/D199/D200/D201/D202
2-66
SM