Internal Finisher Sr3180; Installation Procedure - Ricoh D197 Service Manual

2.19.2 INSTALLATION PROCEDURE


When you install this option, turn off the power to the machine, and unplug the power
plug from the wall socket.

If this option is installed with the power on, it will result in an electric shock or a
malfunction.

Cannot be used together with "Bridge Unit BU3070", "Internal Shift Tray SH3070", "Side
Tray Type M3" or "Internal Finisher SR3130".

For using this option together with "1 Bin Tray BN3110", attach the bottom plate of this
option at the beginning, then install the "1 Bin Tray BN3110", followed by installing this
option.
1. Remove the orange tape and shipping retainers.
2. Remove the screw [A] securing the unit (
3. Remove the shaft [B] from the slide rail [A] (
SM
x 1).
x 1).
2-135 D197/D198/D199/D200/D201/D202

Internal Finisher SR3180