4.9.9 DEVELOPMENT FILTER
Before replacing the development filter, set the setting of SP3-701-025 to "1" and turn the
main power switch OFF.
If you have to turn the power on again before replacing the part, execute the SP again
before replacing the part.
After replacing the development filter, turn the main power switch ON.
If you replace the development filter together with developer, firstly replace the developer,
next replace the filter.
1.
Development unit (page 4-74)
2.
Development filter [A]
SM
4-87
D197/D198/D199/D200/D201/D202
PCDU