Ricoh D197 Service Manual page 941

Input Check Table
Shift Tray: Position Sensor 1
5-803-085
Detects shift tray position.
(0: Stop on this side. during moving towards inner,
1: Stop on inner side. during moving towards this side)
GAVD Open/Close Detection
5-803-094
For checking door open/close during process. No need to operate.
Relay Fuse Blown Detection
+24V
5-803-095
Detects state of 24V fuse on the bridge unit.
(0: Not cut, 1: Cut)
Relay Fuse Blown Detection +5V
5-803-096
Detects state of 5V fuse on the bridge unit.
(0: Not cut, 1: Cut)
PCB Ver Management
5-803-100
Displays PCB version management ID.
Displays in order of ID0, ID1, ID2, ID3, ID4 from the left.
Tray 1 Size Switch
5-803-101
Value changes depending on paper size of tray 1.
Controller Fan:Lock
5-803-102
Detects CTL fan lock status.
D197/D198/D199/D200/D201/D202
[0 or 1 / 0 / 1/step]
0: Stop on this side. during
ENG moving towards inner
1: Stop on inner side. during
moving towards this side
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: Not cut
1: Cut
[0 or 1 / 0 / 1/step]
ENG 0: Not cut
1: Cut
ENG [0 to 31 / 0 / 1/step]
ENG [0 to 15 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: Running
1: Stopped, or locked
5-366 SM