When Feeding Thin Paper - Ricoh D197 Service Manual

14. Attach the bracket [A] (
15. Fasten the grounding wire [A] (
16. Attach the scanner rear cover.
17. Plug in and turn on the main power switch of the machine, and then check the ARDF
operation.
18. Make a full size copy. Check that the registrations (side-to-side and leading edge) and
image skew are correct. If they are not, adjust the registrations and image skew.

When feeding thin paper

When feeding thin paper, adjust the sliding tray to the point shown below [A].
When feeding normal paper, adjust the sliding tray to the point shown below [B].
If not, it may cause problems as follows:

Original jam

Original curl

Originals cannot be stacked neatly
SM
×1).
×1).
2-63
ARDF DF3090
D197/D198/D199/D200/D201/D202